• info@oag.com.pk
  • 092-42-36362835-38
  • Specification


    System Configurations – JETVARNISH 3DS
    Printing Technology MGI’s exclusive inkjet engine technology
    Drop-on-Demand (DoD) technology
    Piezoelectric printheads,developed and manufactured by Konica Minolta
    Single pass printing
    Flexible & scalable printing architecture
    Coating Thicknesses Depending on your file, the inks used and the type of
    surface of your sheet, the coating thickness can vary.
    On laminated and aqueous coating: 21 μm – 232 μm*
    for 3D raised effects and tactile finish. On toner and
    coated paper: 30 μm – 116 μm/232* μm for
    3D raised effects and a tactile finish
    Production speed In 2D/flat mode:
    Up to 2,077 A3 sheets per hour (with 21 μm)
    In 3D/raised mode:
    Up to 1,468 A3 sheets per hour (with 43 μm)
    Up to 547 A3 sheets per hour (with 116 micron)
    Registration SmartScanner coupled with Artificial Intelligence (AIS)
    for fully real-time  automated sheet-to-sheet
    registration process. No crop mark required.
    Formats Min. 21 x 29.7 cm / 8 x 11.8”
    Max. 36.4 x 102 cm / 14.33 x 40.15”
    Max. Printable Width 35.3 cm
    Substrate Thickness Min: 135 gsm and not less than 150 μm or 6 mil before printing & lamination
    Max: 450 gsm and not more than 450 μm or 18 mil before printing & lamination
    Motorized height-adjustment print heads
    Substrates** Printing on most matte or glossy laminated surfaces,
    with or without aqueous coating, layered paper, plastic,
    PVC and other coated materials
    Varnish on toner Spot 3DS coat directly onto most digital prints with
    no lamination or coating required
    UV Coatings and capacity 3D varnish delivered with a 10-litre tank capacity
    High Capacity
    Automatic Feeder
    Feeder able to handle a paper pile up to 30 cm
    2,500 sheets at 135 gsm
    High Pile Output Stacker Stacker able to handle a paper pile up to 30 cm
    2,500 sheets at 135 gsm
    Paper Path 100% flat paper path; Vacuum feed system
    Air feed system; Automatic double sheet detection
    In-line LED dryer “On-the-fly” drying & curing via integrated LED
    Spot Coated sheets can be immediately finished
    or handled, no additional drying time required
    Front End System Dedicated PC; CPU + touch-screen + keyboard/mouse
    Ethernet connection 10/100/1000 BT (RJ 45)
    Built-in Application Software Suite
    Comprehensive job queue management
    Predictive printing cost calculator
    (coating consumption)
    Dedicated image editor to do local and fast
    image editing prior to production
    Maintenance &
    Remote Technical Support
    Daily maintenance completed in less than 10 minutes
    Majority of procedures are automated
    Automatic cleaning system
    From cold start to production in less than 10 minutes
    Remote troubleshooting & support via included video/
    web camera (high speed internet connection required)
    Operator Panel Integrated user-friendly LCD touch-screen
    Options Twin bar option:
    2nd print engine to increase 3D print speed and coating
    thickness, up to 232 μm variable data option.
    Variable data option:
    Complete system including RIP, barcode reader and
    MGI software to automatize the association between
    a pre-printed barcode and its specific spot coating file
    (L x W x H) &
    4.26 (5.47*) x 1.14 x 1.80 meter
    (with the longest paper extensions installed)
    1 metre clearance required on all 4 sides

    ± 1,100 kgElectrical requirements7.5 kW (32 A) at 220–240 Volts; 2 plug CEE/IP44 32A (1P+N+E)OperatingTemperature: 18 to 30°C
    Environment Relative humidity: between 35 – 55%
    (no condensation)Respecting the
    Eliminates resource waste (wasted electricity,paper and varnish)
    No plates (offset) or screens (screen printing)
    No cleanup or preparation between jobs
    Drastic reduction in amount of consumables and
    use of bulk packaging.
    Coating without volatile solvent.

    The default sheet format is A3, unless otherwise stated
    1) with an additional option installed
    2) speed will vary according to printing parameter used
    3) confirm substrate/toner compability with KM

    * With the Twin Bar
    ** The used substrate needs to be either coated or laminated. Otherwise the media is absorbing the varnish and the destred effect might get lost

    System Configurations – iFOIL S
    Production Speed Up to 2,298 A3 sheet size per hour
    (or 20 meters/min)
    Formats Min: 21 x 29.7 cm
    Max: 36.4 x 102 cm
    Hot foil stamping area 32 x 102 cm
    Substrate thickness Min: 135 gsm and not less than 150 μm/6 mil
    before printing and lamination
    Max: 450 gsm and not more than 450 μm/18 mil
    before printing and lamination
    Motorised height-adjustment print heads
    Substrates Most matte or glossy laminated surfaces, with or
    without aqueous coating, layered paper, plastic,
    PVC and other coated materials
    Most digital prints without any lamination or coating
    Foil rolls Standard internal core: 1 inch – Min./Max. widths:
    10/36 cm
    400 meter length (average)
    Up to 2 rolls loaded simultaneously on the same holder
    3” internal core is optional
    Embossing From 21 μm to 116 μm thickness
    From 21 μm to 232 μm thickness (Twin Bar optional)
    Compatibility Online module that connects to all JETVARNISH 3DS
    Dimensions (L x W x H)
    2.09 x 1.24 x 1.80 meter
    ± 850 kg
    Electrical requirements 7.5 kW (32 A) at 220–240 V – 50/60 Hz
    2 plugs CEE/IP44 32A (1P+N+E)
    Options High capacity stacker for paper stacking up to
    60 cm paper height
    3” core inch foil holder